6 Presidents Who Are Also Authors

Borderline Personality Disorder A Deeper Look - 3021 Words

Borderline Personality Disorder: A Deeper Look Ashley Patrice Bell Kenai Peninsula College PSY A345 Abstract Borderline personality disorder (BPD) stands out as the most commonly diagnosed, among the most complex, one of the most studied, and is seen as one of the most devastating of the personality disorders (Gunderson, 2011). Borderline personality disorder in essence, â€Å"is a pattern of instability in interpersonal relationships, self-image, and affects, and marked impulsivity† (American Psychiatric Association, 2013). New evidence is leading to theories that borderline personality disorder has predisposing aspects that point to genetics as being one of the factors leading to individuals being diagnosed. Past childhood†¦show more content†¦A personality disorder is inflexible and proves to be pervasive. Onset is in adolescence or early adulthood, stable over time, and leads to impairment or distress for the individual (American Psychiatric Association, 2013). Out of ten classified personality disorders, borderline personality disorder stands out as the most commonly diagnosed, among the most complex, one of the most studied, and is seen as one of the most devastating of the personality disorders (Gunderson, 2011). Borderline personality disorder in essence, â€Å"is a pattern of instability in interpersonal relationships, self-image, and affects, and marked impulsivity† (American Psychiatric Association, 2013). Personality disorders can be grouped into one of three different clusters based on their descriptive similarities. Borderline personality disorder falls into Cluster B, which includes antisocial, histrionic, and narcissistic personality disorders as well. Individuals diagnosed with a disorder from this cluster set all have traits of appearing dramatic, emotional, or erratic (American Psychiatric Association, 2013). The term borderline was coined due to patients being thought to exist as atypical variants of other diagnoses as well as these same patients being prone to testing the limits, or borders, of whatever was set for them. It was not until 1980, when borderline personality disorder

Identity and Belonging †Change Can Be Easy or Hard †Reference to Summer of the Seventeenth Doll Free Essays

Throughout your life the process of ageing is constantly influencing your identity. As William Shakespeare wrote â€Å"All the world’s a stage, And all the men and women merely players; They have their exits and their entrances, And one man in his time plays many parts,†¦Ã¢â‚¬ . Our identity is forever changing and this is because we are forever ageing. We will write a custom essay sample on Identity and Belonging – Change Can Be Easy or Hard – Reference to Summer of the Seventeenth Doll or any similar topic only for you Order Now Throughout out the three main stages of ageing – youth, middle age, elderly- we don’t just age physically, we age physiologically as well. Hence as we age we mature, become wiser and more aware of the world around us. As of this our views change from each stage of life, thus inflicting our identity to change. Although some people find this transition from one stage of life to the next to be difficult and dread upon its occurrences whereas others enjoy ageing and just take it as it comes. As a baby we have our identity created for us, they say â€Å"give me the boy at seven and I will give you the man† implying that until the age of seven a child is dependent on their very first social unit, that is family. It is the multiplicity and complexity of family that gives children real life experiences into human relationships and what teaches them morals and values which will always be a part of their identity, although as you age, and mature you become less dependent on your family and are able to venture out into the world. This usually happens around the age of adolescence. This is a time when adolescences have the world at their feet and they are â€Å"servants to their own dreams†. Many people enjoy this part of growing up as their bodies are at the peak, meaning they are able to push them to do whatever they want. They are less susceptible to illnesses and less likely to damage themselves; when they do the body’s ability to repair at that age is remarkable. Not only are they at the physically peak of their lives, they are usually at the social peak. Their social networks at this age are usually highly complex and turning 18 opens the doors to a once prohibited world full of new adventures and experiences, such as going clubbing, driving and being classed as an adult. However many adolescence’ find it hard to transition to adulthood as they no longer have the burdens of high school pressures and friends. This also creates problems for people who only have social networks that they have from school meaning when school is over they need to adapt to a new environment and become independent. This can be emotional and daunting for many youth. Middle age is a crisis for many people both men and women. It is a time when they have left the excitement and potential of their youth, instead they reflect back on where they have come from and often look with dread towards their older years, in Ray Lawyers Summer Of The Seventeenth Doll this period of time effects many characters negatively as they cannot accept they are aging and thus see change as a daunting factor. Roo, the ganger of a team of cane cutters, realises he is ageing when his back gives way and he is forced to step down as top dog. Since he was young he had been a cane cutter, that was his identity but because of his ageing body, his identity will change as he can no longer be a cane cutter, this not only affects Roo but also Olive. Olive has been in the group since it started seventeen summers ago and is reflecting on her life so far, remembering the times when Roo and Barney would come down South to see her and Nancy during the layoff. However since Nancy has left the group to go get married, Olive realises that she is turning 40 soon and is still clinging to her glory days. In order to keep her â€Å"youth† she has decorated the lounge room with the keepsake dolls to testify her persistence on keeping the group together and displaying her symbols of youth. With Olives obsession of keeping the group together revels a woman who cannot accept that she is getting older and who can adjust to the new era in her identity. For olive, the change of getting older is not physically but more physiological as she sees this change as losing her youth. Although middle age is not always negative for everyone. Although Nancy is the catalyst for the group’s breakdown, she realises that she can no longer act like a youth, as she did with Olive and the group and as such has accepted the fact that she is getting older, hence why she abandoned her friends to settle down and get married to start the next chapter in her life. Although many people believe it’s the best years of life as it is the only â€Å"time you really live as the young are slaves to dreams; the old are servants of regrets. Only the middle aged have all their 5 senses in the keeping of their wits. † The last period of life that has been categorised as â€Å"old age† and is now considered to be after 65. Some people choose to accept old age as a positive as they have lived their lives and are now in retirement. Many elderly people see being able to retire as being able to act like they are young again as they have completed the majority of lives responsibilities, such as rearing children and working for a living, this gives many the opportunity to travel and do what they desire but at a cost. Having lived for such a long time has taken a physical toll on the body, it is weaker and more frail then that of a youthful person, hence why some older people see old age as a negative. They feel as though they are stuck inside an â€Å"old carcass† and believe that â€Å"nature is cruel; tis jest to make old age look like a fool; (because) the body crumbles, grace and vigour depart† No matter what age you are there will always be a positive and a negative but regardless of this, age will always influence your identity as it changes your thoughts as you become wiser and more knowledgeable about the world around you. Throughout each age group you will have new realisations about the environment you live in and this will cause a physiological or physiological a change which influences your identity. How to cite Identity and Belonging – Change Can Be Easy or Hard – Reference to Summer of the Seventeenth Doll, Papers

Impacts in the Developers Selling Land †MyAssignmenthelp.com

Question: Discuss about the Australian Consumer Law Impacts in the Developers Selling Land. Answer: Discussion The Consumer Law has been introduced for the fair trading and provides protection for the consumer. It has enforcement of the laws in the Australian Government and the States and Territories where they monitor the Legislative and Governance Forum according to the implication of Australian Law. The sale or grant of interest in land also controls the Australian Consumer Law through all over the States. The supply or delivery of the financial products or services also covers under the Australian Consumer Law (Consumerlaw.gov.au, 2017). The Australian Consumer Law has important impacts in the developers selling land because it controls the selling and purchasing the land. On the transaction of real estate the Australian Consumer Law has uses their own law of applications which helps to identify the issues in the trade or commerce. The misleading or the deceptive conducts is one of the pat in the Australian Consumer law which applied for the trade or commerce. The application of law of the deceptive conducts also works on the unfair contract terms where the consumer contract has recognized as void in the practice of the trade or commerce purposes. The ACL also provide protection and safety for the consumer goods and product-related services. Therefore the enforcement of information standards is another part which also formed by the ACL. It is actually regulates the consumers for the sale or grant or any interest regarding the acquisition of personal, domestic or household use or consumption. It also regulates consumer guarantees for the sale and goods which includes: The right to sell and deliver the goods of the supplier. The possession which require for the delivery of the goods of the consumer. The goods should be free from every undisclosed securities or charges. The delivered goods should be safe from ay disputes and must acceptable in the appearance and finis. The delivered goods should be according to the description as per the seller. The manufacturer must have proper facilities for repairing the goods. However for the building industry there are varieties of regulation in ACL for associated with the every issue in the building purposes. Under the Australian Consumer law the consumer contract has been made where the contract provides the information regarding the selling and buying of the land for the personal, domestic or household. The Australian Consumer Law set the standards of the contract where a contract has been developed between the developer and an individual for selling any land or goods where a particular standards has been set unless the develop has the right to go to the court (Corones Christensen and Howell 2016). Normally any sale contract always introduced according to the standards of contract. According to the standards of contract of Australian Consumer Law when the developer set the agreements or contract the selling agent records every negotiations regarding the selling and purchasing of the land. However the ACL helps to ensure that the consumer can negotiate with the terms when they are selling or purchasing the lands. According to the standards of the contract in ACL defines the both misrepresentation and unfair contract terms (Consumerlaw.gov.au, 2017). Misrepresentation: The misleading or deceptive conducts or misrepresentation in the trade and commercial has been prohibited from the beginning of the Australian Consumer Law. The section 18 of the Australian Consumer Law provides the legislation where the misleading or deceptive conducts are prohibited. The consumers and the developers both can use the legislations of the sec-18 of the consumer law to comply with the business ad every legal proceeding regarding the building business (Corones Christensen and Howell 2016). The selling agents and business developers are bound to make it sure that the consumers must have knowledge about the practice of the misrepresentation according to the Australian Consumer Law. The developers and the gents must prohibits their staffs from the engaging in the behavior of misleads or deceives. The misrepresentation includes different types of prohibitions according to the Australian Consumer Law (Consumerlaw.gov.au, 2017). Those are: When the developer or the selling agent misleads the client intentionally When the developer or the selling agent intentionally encourage the consumers for a wrong conclusion When developer or the selling agent provides the information which is factually correct but represents false impression When the developer or the selling agent knows the correct information but never correct the misunderstandings. When the developer or the selling agent not updates every information regarding the rules of the Australian Consumer Law. When the developer or the selling agent intentionally not inputs any information regarding the contract with the consumers. When the developer or the selling agent has making false, exaggerated or inaccurate claims in the contract of selling without the knowledge of the client. When the developer or the selling agent stay silent about any disputes on their building material which affect the consumers then it also treated as misrepresentation by them (Corones Christensen and Howell 2016). The misrepresentation is recognizing as a common law of actions where the false or misleading representations in property transactions is one of the recognize part in the Australian Law. The developers and the every individual are the part of the purchasing or selling the property along with these obligations. The developer, agents and individual both of them are works under these obligations (Corones Christensen and Howell 2016). When the misrepresentation is occur at the time of dealing of the sell and purchase the property the sec- 30 of the Australian Consumer Law stated the legislations of prohibits false or misleading conduct in connection with the sale, or possible sale. The statutory position of the misrepresentation of the land purchasing has several impacts which are connected with the sale, or possible sale, of an interest in land (Consumerlaw.gov.au, 2017). Those are: The misconducts sale, or possible sale, of an interest in land is connected when according to the sponsorship, affiliation or approvals of the statement which is depend on the person who is making the decision. According to the nature of the land also depends and applies the law on the statutory position of the misrepresentation. The amount or capital or price has been paying on that particular land. The geographical location of the land also decides the statutory position of any contact (Corones Christensen and Howell 2016). The owner of the land or the person who belongs to the land or who is capable to use the land by lawfully also depends on the statutory position of the agreements. The existence of the land where it has rights to make the availability regarding the use of the land. However the misrepresentation can be defines in various ways where it shows the existence and establishment such facts can be verbal or written. The misrepresentation only covers those parts where the statement has been stated. It there is any reliance establishes regarding the representation or the detriments are suffered due to the result of the reliance. In the case of Miletich v Murchie (2012) it has been found that the misrepresentation has been established by the verbal representation in accordance with the misleading advertising material. In this case the court has been determined that the disclaimer never release the liability according to the material of the contract (Corones Christensen and Howell 2016). Therefore it is the duty of the purchaser to depend only for the representation according to the circumstances. In another case, Australian Competition and Consumer Commission vs. Metricon Homes Qld Pty Ltd [2012] the misrepresentation has been stated in an advertising mate rial. Therefore in the misrepresentation the Build Time Guarantees when are not able to provide the advertised costs. Though not only the developers but also the agents are bound identify the misrepresentation while they involved in the selling and buying. When any false statement or intentional misstatement has stated for a person in the contract then it will recognize as misrepresentation (Consumerlaw.gov.au, 2017). The sec- 18(1) defines that the no one who is engage in the trade or any commerce business never allow to represents any statements which is inappropriate and established a misleading or deceptive conducts in the business (Corones Christensen and Howell 2016). According to the Australian Consumer Law the sec- 151 defines the amount of penalty for misrepresentation conducts which amount could be $1,100,000 for a body corporate and $220,000 for individuals (Corones Christensen and Howell 2016). The ACL has its own significance for the application of the legislation for the developers to sell and purchase the land or property to the consumers. However the developers and agents are using the legislation while they are applying the legislation in the property contracts for making the fair deal (Corones Christensen and Howell 2016). The ACL applies the legislations to establish a fair reason where they make the consumer contract for the sale or grant of an interest in land according to the position of the land which covers the ownership of the property. The contract of sale has operated under a strata title and land sold off-the-plan according to the standards of the contract (Consumerlaw.gov.au, 2017). In another case of Gough Anor v South Sky Investments Pty Ltd [2011] of the Australian where the Supreme Court of Queensland stated a decision where the importance of the transaction in written contract has been found. In this case the court has found that the purchaser of the land has taken legal actions against the seller or vendor for delivering them a completely different apartment which has no significance according to the written contract (Consumerlaw.gov.au, 2017). Therefore according to the Australian Consumer Law the seller has breach the agreement. According to the agreement the seller should deliver the accurate product to the purchaser but he failed to deliver the product. It is one of the examples of the misrepresentations (Corones Christensen and Howell 2016). Unfair Contract Terms: The Australian Consumer law defines the structures of the application of the unfair contract terms in the consumer contract with the developers in the property contract. The unfair contract terms define the standards where void contract terms has been establishes. The void contract represents the unfair treatments only when the individual parties are require to have services or products which are wholly or predominantly for personal or related with the household uses. For the set of the standards of the contracts the Australian Consumer Law has introduced several terms which represents the unfair contract terms. In the bargaining power the party or the consumer has more power to negotiate the transactions (Corones Christensen and Howell 2016). The contract preparation depends when the both of the party prepared for the negotiation process. When the parties are bound to accept the terms of the contract to take it or leave it. The parties have the opportunities to negotiate the contrac t which will be effective for the building contract (Corones Christensen and Howell 2016). They also looks for the proper transactions according to the contract. According to the Australian Consumer law legislations the matters only prescribed according to the regulations (Consumerlaw.gov.au, 2017). Therefore there are certain terms are represents the significance whether the terms are fair or unfair in the consumer contracts. The Australian Consumer Law defines various examples where the unfair terms have been described (Corones Christensen and Howell 2016). It may include: To terminate or vary the consumer contract. The price will depend according to the capability of the buyer to terminate the contract according to the contract law. The characteristic or the implication of terms are also depends on the property which will be sold to the buyer. The unilaterally interpretation on the contracts which may breach or not. The establishment of the meaning also depends on the unilaterally interpretation for the unfair agreements. The terms also prepare the rights to make allegations to one party to another party. When the terms of the contracts have been breached then it will also recognize as the unfair terms of the contracts. For the determination of the unfair terms the Australian Consumer Law has set the terms which are considered by the court (Corones Christensen and Howell 2016). According to the transparency of the contract terms like the formation of the contract whether it has been written in English with proper meaning and the structures of the contracts. The contracts terms only represent the fair terms when the parties mutually confirm the price in the contract. The fair terms also defines when it describes the subject matter of the contract according to the requirements which are permitted or have accesses according to the Australian Consumer Law (Consumerlaw.gov.au, 2017). In the case of Koompahtoo Local Aboriginal Land Council v Sanpine Pty Ltd (2007) the unfair terms has been conducted due to the breach if the contract terms. It has been found that the parties always have some common intention where they understand the context of the terms in the contract but failed to serve according to the terms. The unfair terms has been conducted only for the breach of the terms (Corones Christensen and Howell 2016). In the Qin v Smith (No. 2) [2013] case it has been found that breach of contract justifying termination, and anticipatory breach according to the settlement of the purchaser and the seller of the said property (Corones Christensen and Howell 2016). Nowadays, the developers are trying to minimize the challenges in the purchasing and selling the lands regarding the use of the terms under the contracts. They all first try to check all the terms regarding the balance and paying the attention on the unilateral rights to the seller. The reviewing the terms and proceed according to the court rules where both party will have the riht to negotiate the terms according to the relevant contractual context. They also review the terms for maximizing the prospects of the process of the court where they need t provide proper justification for the terms and considers every incorporating outlines and acknowledged the matters. The developers also review the terms and operate according to the detriment of the other party (Consumerlaw.gov.au, 2017). When a term has been considered in the favor of the seller, there must have other presences of the legitimate interest for the identification f the contract. Therefore the consideration is mandatory for the future disclosures according to the application of the legislations and the rules of the Australian Consumer Law (Corones Christensen and Howell 2016). References Australian Competition and Consumer Commission v Metricon Homes Qld Pty Ltd [2012] FCA 797 (Metricon) Butler, D., Christensen, S., Willmott, L. and Dixon, B., 2013. Contract Law Case Book. Consumerlaw.gov.au. (2017). Australian Consumer Law. [online] Available at: https://consumerlaw.gov.au/ [Accessed 22 Aug. 2017]. Corones, S.G., Christensen, S.A. and Howell, N., 2016. Submission to Australian Consumer Law Review Issues Paper. Evans, P., 2017. The building and construction industry code of conduct (WA). Brief, 44(6), p.22. Gough Anor v South Sky Investments Pty Ltd [2011] QSC 361 Koompahtoo Local Aboriginal Land Council v Sanpine Latimer, P., 2016. Protecting Consumers from Unfair Contract Terms: Australian Comparisons. McKendrick, E., 2014. Contract law: text, cases, and materials. Oxford University Press (UK). Miletich v Murchie [2012] FCA 1013 Pearson, G., 2017. Further challenges for Australian consumer law. In Consumer Law and Socioeconomic Development (pp. 287-305). Springer, Cham. Pty Ltd (2007) 233 CLR 115 Qin v Smith (No. 2) [2013] VSC 476 Smith, N., 2015. Intellectual property: Misleading and deceptive conduct: When copying is not enough. LSJ: Law Society of NSW Journal, (11), p.76. Smith, N., 2016. Intellectual property: In the world of google adwords, is your competitor's trade mark fair game?. LSJ: Law Society of NSW Journal, (23), p.90. Thampapillai, D., Tan, V., Bozzi, C. and Matthew, A., 2015. Australian Commercial Law. Cambridge University Press.

What Does the American Dream Mean to You free essay sample

Does America still provide access to the American Dream? I believe that is done. America provides education, freedom, and opportunity, which allows people access to the American Dream. Education allows people to be successful, freedom allows us to make our own decisions, and opportunity enables us to achieve and prosper.The role education plays is very important in being successful in this country. Having an education opens many doors for employment opportunities. Education provides more than employment opportunities, it provides you with life skills. However, education requires dedication and hard work, that will lead you to success. Barack Obama said: â€Å"Through hard work and perseverance my father got a scholarship to study in a magical place, America.†Furthermore, America provides civil rights freedom for everyone who lives here. People are able to work and study in places they want to without being stopped by the force of government. We all can be successful through the freedom we are given if we work hard for it. We will write a custom essay sample on What Does the American Dream Mean to You? or any similar topic specifically for you Do Not WasteYour Time HIRE WRITER Only 13.90 / page For example, a woman in some countries are not able to get an education, those women are unfortunate and are stopped by the forces of government, which; this affects those women from reaching success; America provides freedom and support for an opportunity in many ways. As Barack Obama mentioned in his 2004 keynote address: â€Å"America, that shone as a beacon of freedom and opportunity to so many.† â€Å"We hold these truths to be self-evident, that all men are created equal, that they are endowed by their Creator with certain inalienable rights, that among these are life, liberty and the pursuit of happiness.† We all have freedom in our rights, and if we work hard that will allow us to be successful in life.With that being mentioned, the opportunity will allow people to go as far in life as they choose to. We all have the opportunity to be successful in our own ways, but in other countries, people dont have opportunity and choices. America allows you to achieve your full potential. In this country we can embrace opportunities for ourselves and become rich or very successful, regardless of ethnicity, gender, or age. Barack Obama addressed this topic in his 2004 keynote address: â€Å"in a generous America you don’t have to be rich to achieve your potential.†As I have said, when looking for the American Dream, we need to stay positive and focused on success and the values mentioned above. I believe thats how people can reach and live the American Dream. We must get an education and work hard, dream and believe, and this will give people a great chance for success and happiness. Having these qualities will help you reach the American Dream.

Growth of NYS Business Essays - Canal, Free Essays, Term Papers

Growth of NYS Business Essays - Canal, Free Essays, Term Papers Growth of NYS Business April 17, 1996 For a number of reasons, business enterprise in New York grew by leaps and bounds between 1825 and 1860. New York's growth between the years 1825 and 1860 can be attributed to a number of factors. These include but cannot be limited to the construction of the Erie Canal, the invention of the telegraph, the developed of the railroads, the establishment of Wall Street and banking, the textile, shipping, agriculture and newpaper industries, the development of steam power and the use of iron products. On October 26, 1825 the Erie Canal was opened. The canal immediately became an important commercial route connecting the East with the Ohio and Mississippi Valleys. With tht time of travel cut to one-third and the cost of shipping freight cut to one-tenthof the previous figures, commerce via the canal soon made New York City the chief port of the Atlantic. The growing urban population and the contruction of canals, railroads and factories stimulated the demand for raw materials and food stuffs. In 1836 four-fifths of the tonnage over the Erie Canal came from western New York (North, 105). Much of this cargo was in the form of agriculture goods. The farmer become a shrewed businessaman of sorts as he tended to produce whatever products would leave him the greatest profit margin. The rise of the dairy industry was by far the most significant development in the agricultural history of the state between 1825 and 1860. Farmers discovered that cows were their most relliable money-makers, since both the domestic and foreign market kept demanding more dairy products (Ellis, 273). Price flucuations became increasingly important for the farming population between 1825 and 1860. Prices rose from the low level of the early 1820's until the middle 1830's and the farmer's shared in the general prosperity (271). Although the rapid industrialization and urbanization of New York had a great deal to do with the success of agricultural markets sporadic demand from aboard as a result of the Irish famine, the Crimean War and the repeal of the Corn Laws in England also contributed(North, 141). During this period Ohio, Pennsylvania, New York and Virginia, in that order were the leading wheat growing states. Between the years 1840 and 1850 New York ranked first in the production of beef. The absence of politic party differences on issues related to the the growth of democracy existed in regard to the foremost economic questions, there was absolutely no partisan division evident in the movement to incorporate new financial institutions; rather , the primary factors , which the legislators examined, concerned value, feasibility, profit and the location within the state. Dozens of turnpike proposals, most of which werebacked by the Republicans, passed the legislature; but the Federalists cooperated, seeing the chance for profits. Prominent Federalists like John Rutherfurd, John Neilson, William Paterson, John Bayard, and James Parker invested susstanial sums in the turnpike business. There were numerous Republicans who were also vitally interested in the turnpike business (Kass, 150). Bipartisan support also accompanied plans for the construction of bridges and canals. All of the parties contained a large number of adherents from from every level of economic well-being in society. This helps to expain the absence of any clear-cut party differences on the major economic issues of the such as the chartering of banks, the protestive tariff, internal improvements, the development of manufacturing, and the promotion of superior agricultural techniques. Each politcal faction had segments both pro and con on most of these questions, and, inall cases it was opprtunism, the desire for profits, which was decisive in determining one's political position on these economic issues(175). New York's economic growth can also be attributed to the invention of the cotton gin. Cotton had become a boom crop in the south, however, plantation owners were either too engrossed in the production of their crops or too unschooled in business techiniques to handle its distribution. Some just did not want to be bothered. This opened thee door for agents representing New York shipping firms who were only too happy to help them out - for a fee. This scheme not only earned the New York merchants a handsome profit but also solved the problem that without cotton the ship owner would be hards preesed to find adequate cargoes for their return voyages. And so it came about that New York in the nineteeth century became the nation's foremost shipper of cotton(Allen, 108-109). The cotton shipments entering New York harbor were brought to textile mills for processing. A group of New york capitalist estashlished

Google's Culture is Truly Unique Essay Example | Topics and Well Written Essays - 500 words

Google's Culture is Truly Unique - Essay Example 2. Using the competing values framework, Google’s culture can be analyzed. The company possesses characteristics of a clan, but minimally and non invasively so. In terms of adhocracy, this is something that the company may now be too large to handle. From a market framework, Google is best viewed from the international perspective. â€Å"Googles hiring policy is aggressively non-discriminatory and favors ability over experience. The result is a staff that reflects the global audience the search engine serves† (Google, 2009). Despite its framework of easygoingness, Google is a hierarchical culture. 3. Google’s stated mission is simple, and only takes one line of company documents. â€Å"Googles mission is to organize the worlds information and make it universally accessible and useful† (Google, 2009). The culture type most associated with out of the options from the previous question, is market. This is not a hierarchical statement, but one that is centered on the resource that the company presents to the market as its primary service. The statement also shows how Google, after achieving similarly staggering growth with Microsoft, did more of a one-hundred-eighty degree turn in its internal culture: though still aggressive, the company realized that once it was an eight-hundred-pound gorilla, doing parlor tricks was more threatening than amusing. The company needs to retain its edge. 4. In terms of techniques for changing organizational culture, Google has used various methods to form its culture. Market research is important, and socio cultural considerations include how the customer perceives a large company with expensive stock like Google. Related factors of differentiation and switching costs are, as in the bargaining power of suppliers, related to this relationship. This shows how many of the forces in competition that the public sees have a symbiotic or integrated function

Stakeholders Assignment Example | Topics and Well Written Essays - 500 words

Stakeholders - Assignment Example ent (which until his demise was being held by its founder Steve Jobs) has to run the company meticulously in order to maintain such profits and satisfy their stakeholders. Recently however, the company has been having ethical issues with their clients, the latest being that their iPhones’ iOS is pulling out addresses from the owner’s address book without their permission. This is a breach of privacy and security that are supposed to be enjoyed by the owner of the iPhone. A breach of privacy is one of the worse ethical codes to happen. The company has also been receiving criticisms due to their labor contracts where they even have child labor in their numerous company factories. It also has environmental malpractices as well as business ones. These are not only ethical but also legal issues that can bring the company down if nothing is done to combat them. The different stakeholders in the company will be affected differently by all these legal and ethical misconducts of the organization. The shareholders of the company will lose money once the company starts dropping in market share. Some will even sell their shares and this will start sinking the company. Apple has over 70% of its shares being held by institution and mutual fund owners (Gustin 2012), hence when they decide to sell their shares, the company will go under. Once the company starts losing its revenue and profits, the other stakeholders to be affected are the employees in the company including even the company workers. There will be massive layoffs in a bid to avoid incurring more loses and try to save a little to help the company recover to its glorious position. The company’s investors who are also among the stakeholders will also start pulling out to go invest in another company that is not marred by ethical and legal misconduct and may soon start paying damages in court when lawsuits start being filed as a result of the misconduct. Once the investors pull out, that is the beginning of

Research paper (The Death of the Ball Turret Gunner by Randall Essay

Research paper (The Death of the Ball Turret Gunner by Randall Jarrell, 1945) - Essay Example The message that Jarrell is trying to convey is presented in only five lines, descriptive and abstract five lines. Brief as it is, it evokes a powerful, vivid, and moving message. The tragedy of war and lives lost in battle is depicted, leaving the readers a poignant recollection of the cruelty and obscenity of armed conflict. His concise tribute to the victims of war is achieved through his mastery of paradoxism, metaphor, even hyperbole. Thus, it unfolded various conceptual interpretations of the prose. The opening line speaks of birth. He fell from his mother’s womb not into ordinary human life but into the womb of the State (Wood). This is during the wartime period when men were drafted for military service. A man conceived in the protective nest of his mother’s womb, ironically delivered into the chaotic world of government servitude. A moment of stillness and sleep superseded by terror and anguish. Going into the battle is opening to the possibility of losing his life in the name of his motherland. And to lose his life in the hands of the enemy. The thought of whether such action is his personal choice comes to mind. It appears as if he does not want to go, for the threat of being killed in action is possible (Pericles). Sleep and State accords the commanding words in this line. Sleep is to comfort, and State is authority. The analogy of an innocent life and horrible death of the machine gunner as expressed by Randall Jarrell. From the beginning he is moulded for only one purpose, and all that happens to him is for this public usefulness. He exists only to be a victim (Fein, 1961). The birth, according to Dawson, may be seen as the rebirth of initiation into a mature vision of reality and evil. The time between birth and death is lost. The poem presents a man who seems to have lived in order to die (Ferguson, 1974). It encompasses a single moment in the gunner’s life- his identity, his innocence and when he was robbed of his life

A World Health Organization

A World Health Organization Why is health a social issue? Health, in the light of World Health Organization definition, is understood as subjectively felt physical, mental and social well-being as a result of appropriate adaptation to the environmental conditions. Psychical health relates to proper human system functioning. Mental health is connected with ability to recognition of peoples feelings and emotions, coping with difficult situations, problems and stress. Social health concerns the human community, its development and adaptability to the environmental conditions, what means ability to live independently as well as in a social group and retain both individual and group identity. There were many attempts to classify factors conditioning health. During early 20th century up to 1970s, it was considered, that health mainly depends on health service. At the beginning of the 1970s way of perceiving determinants of peoples well-being changed. In 1974 Marc Lalonde, Minister of Health for Canada, proposed The Health Field Concept, in which he distinguished four basic factors conditioning health (Fig. 1.): Lifestyle (50%) Physical and social environment (20%) Human Biology (20%) Health Care Organization (20%) This approach influenced on change in health policy and established base for health promotion In modern societies, some of the main problems regarding the health such as illnesses induced by ageing, globalization, new technologies, and genetic engineering have cultural and social grounds. State of health is strongly dependent on social processes and occurrences such as lifestyle (for instance nutrition, recreation, reaction for stress), social cohesion, wealth, education, working conditions and emotional relations. All this things can on the one hand make worse or on the other hand improve the state of health. Currently, it is considered that, the socioeconomic factors (for instance incomes, social status, education level, social support) affect a persons health to the highest degree. Depending on these conditions, the peoples lifestyle can favour health or be harmful to it. Poverty and low level of education are reasons of health inequalities. In general, people with low social status are less healthy, have worse access to health care and take risky for health actions more often. Social support in human living environments is regarded as significant factor shaping positive health and fighting pathogenic influence of potential stressors. In recent decades, people witness a dynamic development of technology and science. As might be expected, new technologies facilitate human lives and make them more efficient. It is possible to say, that in present circumstances, people are able to have an influence on their state of health. However, not always advances of science and in technology go hand in hand with improvement of quality of life. People, preoccupied with making their lives more comfortable, more and more frequently forget about their biological existence. New facilities, means of transport, automation, all kinds of machines are reducing physical activity in their daily life to a minimum. Mass-media, especially television, take them a lot of free time and force them to the sedentary way of life. Nowadays, people suffer from many ailments defined as civilization diseases, which increase alongside with the (continuously) quickening pace of living. Undoubtedly, work is also a very important determinant of health. When it is done for pleasure, work can give a sense of happiness and positive energy. In practice, it means that actions based on harmony with the environment and self-realization favour persons health. Work, which is not a vocation, is a reason of stress, unwillingness and apathy. Meanings of health change in the popular culture and public awareness. Besides strivings for avoiding diseases, more and more people need fitness, vitality, good looks and good mood. Apart from interest in length of life, there appeared care for its sense and quality. In recent years, there is observed a considerable increase in importance of health in sphere of personal aspirations, aims, and values of individual. Health is no longer defined only as an absence of disease and discomfort. Healthy lifestyle becomes in many environments a phenomenon on the verge of fashion. Health issues come into prominence in public discourse, concerning inter alia social and political priorities. The right to health is one of the most important elements of the human rights. Nowadays, health and disease become valuable goods of expanding market.

Its Time for Education Reform :: Education Reform Essays

  In "Basic Principles of Curriculum and Instruction," Ralph Tyler stated that we should determine what our children need to learn through analysis of contemporary society (1949). I argue further that we must teach beyond today's situation to prepare our students for an uncertain future. All things considered, students' minimal exposure to technology in schools is mystifying. How can we prepare our students for tomorrow's world when we continue to teach with methods and materials from yesterday? My early experiences as a teacher and in my Master's degree program have inspired me to work to integrate technology into the inquiry and constructivist models of science education. I have proven the value of both my instruction methods and curriculum design abilities in my own Biology classroom, at conferences, and while working with other teachers; however, I find the change I initiate to be frustratingly localized. I want to assume a leadership role outside of the classroom so that my ef forts will influence more teachers and students and, perhaps, make a difference on policy and practice in science education.    Computers naturally engage students, so we must embrace and exploit this powerful bond as a means to serve our goals as educators. Yet throughout my experience in educational settings, the role of technology seems to have been reduced to a flashy, colorful way of reinforcing ineffective and outdated teaching strategies. I have focused my talents as a teacher and curriculum designer on the role of technology in the science classroom. I initiated this work during my Master's degree program, which was focused on technology in education, and began to adapt various computer programs and other devices to my Biology curriculum. During my first year of teaching I worked to bridge the gap between such technologies and my constructivist ideology, not only in Biology but also in Earth Science. I knew that if these amazing resources were to advance the mission of science education, they would have to work with the model, not against it.    Through research programs, curriculum development, and specialized training, I have excelled at the integration of multiple forms of technology with research-supported methods of science instruction. In the summer of 2001, I participated in the E-2020 program, affiliated with the University of Colorado at Denver, which matches teachers with scientists for summer research accompanied by workshops in inquiry instruction. My research took place in the Surface Optical Spectroscopy Laboratory at the Colorado School of Mines, where I learned to perform Raman Scattering.

Global Business and Political Forces Case Study Essay

Walgreens Corporation â€Å"C-Level Executives† will have to consider the Global Business and Political Forces associated with their Global International Expansion plans into the Country of Brazil during the period of (2014-2016). Analysis The key issues Walgreens Corporation â€Å"C-Level Executives† pose to face would be attempting a massive global expansion and creating new value innovation within that new global market. The want and need to expand internationally into Brazil might potentially cause the Company to lose its current top rated status quo and therefore could risk their Company’s name and future success rate if prior strategic planning is not done properly. Current competition in the same U.S Market looking to expand internationally such as CVS could also pose and cause a potential threat to Walgreens expansion plans. However, the Brazilian market is even more competitive because Brazilian Company’s already know how to operate in that country and are already familiar with the areas region. Therefore, their capabilities of gaining access to information and expertise about where the high demand for property expansion location sites would be at to open a new booming business, stands to be greater than that of other countries outsourced investors or foreign Company’s looking to expand. Related assumptions Walgreens would have to be able to maintain a competitive advantage point globally, so creating an exclusive brand pertaining to that specific region of the country, as well as, maintaining or improving their current Prescription Savings Club program and product line seems essential to their international expansion success. In order to stay ahead of the game and beat out any competition Walgreens â€Å"C-Level Executives† will need to focus on its core competencies and strengths. These practices are going to be critical when serving a diverse Country, while maintaining Walgreens longstanding tradition of fairness, trust and honesty. ((2013). Company Overview). Alternatives There are several alternative actions the C-Level Executives can take that would include the following: First, management must actively evaluate and manage any potential political risks involved when making global expansion investment decisions and then continue to monitor those associated risks on a routine basis. Political forces and risks that could impact Walgreens are going to be subject to change, so it won’t be considered enough to evaluate those risks only once before the decision to invest has been made. Executives of Walgreens must take an active approach and monitor political risks all the time and use those findings to their advantage by applying those methods strategically towards any other investments, operational plans and any other future decisions. Therefore, management over political forces must be implemented into Walgreens operating business practice and processes, in order to protect their investments. (PwC Advisory and Eurasia Group.) Secondly, obtaining reliable, accurate information and interpretation of international business risks tend to be roads blocks at times for executives seeking to better their decision making through evaluation of political risk. Therefore, the use of multiple world-wide sources in which provide up to date, extremely accurate information that has not only been analyzed but also prepared by top risk managers should also be considered as part of an ongoing systematic approach to political risk management. (PwC Advisory and Eurasia Group.) Thirdly, To avoid any future setbacks from competitors such as CVS and similar Drugstore/Retail chains, Walgreens will need to create and invest in a new value of innovation to enhance their diverse customer’s experience. I believe Walgreens strengths lies in the fact that they have their own unique branding style and a high level of ethical quality in the way they perform their business practice, so by enhancing their current U.S. loyal customer connections over into their potential new global customers they stand a better chance to set themselves apart from CVS and any other competitors they might be faced with along the way. Evaluation International partnerships increase challenges but also create new ideas in new markets that can then be translated back to US markets. Because all companies, even primarily domestic ones, are affected by politics to some  degree, all need a baseline of political risk management activity. At a minimum, company management should be aware of how political risks affect business processes, and they should factor these risks into both investment decisions and general risk management. Recommendation My suggestion would be that the â€Å"C-Level Executives† when operating internationally should carefully analyze their current approach to political risk management and determine whether it is contributing to their current business performance strategy as efficiently or effectively as it could and should be or having and adverse effect, taking away from it instead. Once carefully reviewed and evaluated they should find areas for improvement and make changes accordingly to ensure a better business development plan for the following (2014-2016) timeline. Implementation Long-term sustainable success internationally depends in good part on a company’s ability to grasp the implications of political risk and apply them to business risk. By embedding political risk considerations in normal business processes, companies enable management to make better decisions regarding global expansion, sourcing, branding, intellectual property protection, community and government relations, operational structures, and other business issues that arise in complex international markets. (PwC Advisory and Eurasia Group.) Conclusion Ultimately, any company looking to expand globally has to be willing to take risks, but it’s also essential to their future developmental successes that before taking that huge leap to expand internally that they become extremely aware of the high stacks and potential risks involved. In general, the more a company ventures beyond its home country physically or through outsourcing the more it increases its exposure to political risk. Companies should keep in mind, however, that even a minor investment involving a major risk or opportunity can have a material impact. Sustainable success internationally depends in good part on a company’s ability to grasp the implications of political risk and apply them to business risk. Mark Wagner, Walgreens Executive Vice President Operations & Community Management had this to say: â€Å"Our customers come from all walks of life, and it would be impossible for us to serve them well if we developed identical, instead of individual needs. I’ve found the best way to recognize individuality is by taking time to learn about diverse interests and their background. Everyone has needs, wants and expectations and as managers, it’s our job to develop that strategy and exceed those expectations.† (Walgreens outlines strategy to analysts.)

Russias Entry Into the Cold War

Russias Entry Into the Cold War Free Online Research Papers Russia and United States were Allies against the Axis Powers in World War II. It was an unusual relationship due to both countries political beliefs and ideologies. America, which is based on democratic ideals and Russia ruled by an iron fist was enforced by state controlled oppression. It was for the war that and for the elimination of Hitler’s Nazism that the two came together. The Cold War was a result of American’s inability to limit the Soviet Union’s growth in Europe. Franklin Roosevelt’s negotiations with Stalin at Yalta marked the beginning of the dictator’s reign into Eastern Europe. Roosevelt insisted on democratic reforms in Eastern Europe, but he was too soft on Stalin because he needed his help in ending the war. Stalin saw this weakness as a go ahead to take over Poland, Finland , Romania, parts of Yugoslavia, as well as Latvia, Lithuania and Estonia. America’s diplomatic concessions with The Soviet Union was a necessary evil due to the cost of many lives in the war. This relationship even in it’s best form was the ground for future tension as Russia and America clung to their ideologies. Ending the war with nuclear capabilities created a further gap between the U.S. and the Soviets. Out of the destruction of the war, both nations would grow to fear one another. This fear would last for more than 40 y ears and end in 1990 with the collapse of Communism. Russia’s philosophical beliefs were far different than America. America was founded on the romantic conception of democratic republicanism and checks of balances. Russia had a history of Czarism and it’s rule remained at the top. After 1917, with the rise of Lenin’s Communist party, government would remain in the heads of still a few powerful leaders at the top. Stalin would control the Soviet Union during World War II . Before the war, Stalin was noted as a brutal man who felt he was inferior and therefore killed off his political enemies as he did in the Great Purge. His leadership consisted of fear and intimidation for which many suffered. No one was able to rise above Stalin and even more so rise against him. Everything was in the hands of the state and very little individualism existed. To the common man, Russia’s governing powers seemed aloof and distant. It was clear that the government was not for the people. Stalinist communism censored religious thought and was atheistic. Communism censored the arts and instilled in education. Everything was replaced by propaganda for the party and for the whole of the state. Thoughts were controlled and no one dared against the system. Those who thought differently were quickly punished. Everything was given to Joseph Stalin, any trust and hope was given to him and he alone ruled the vast majority of Russia (Lee 81-85). American’s viewed Communism negatively due to the fact that so many American’s were religious and didn’t take well to atheism and it is also very critical that many Americans were so distrustful of complete government control. This type of thinking created an US-VS-THEM mentality and that need to rid the world of THEM. This thinking brought Americans face to face with Korea and Vietnam and even China. One of Stalin’s goals was to change the economy and modernize it. He pushed Russia forward from an agrarian society to the mode of heavy industry. A move that would benefit Russia immensely in World War II because war out put would exceed that of Germany after 1941. In the 1930s Russia collectivized the agricultural system. This created such a disturbance because output was much less and many people starved. The thought was that this would feed the great urban population and industrial base (Lee 61). The Five Year Plan was supposed to move the Soviet Union into age of heavy industry. They focused less on consumer needs to produce steel, coal and such things like armaments. This produced such a large amount of massive factories and cities in which they produced their goods. Many peasents found jobs in the cities where urban areas swelled. Despite growth in heavy industry, such output prepared the Soviets for the Barbarossa invasion in 1941. Many of the factories moved from cities of siege to the Ural Mountains during the invasion. This showed some strength of efficiency, however, most of the materials needed for the war came from the American Lend-Lease Program. It was an indicator that American efficiency in production far outweighed the Russian economy. As the war progressed and conferences were held to determine the strategy of the new order of Europe, the psychological impact of who would win want became increasingly apparent. The testing of nuclear missiles was held in secret by the Americans because of their distrust of the Soviets (Grenville 317-318). This was a shift in the American attitude prior to the post wart period. Even when the U.S. bombed Nagasaki and Hiroshima, Truman pointed out to Stalin at Potsdam the implications of what this type of warfare could do. Truman worried that the Soviets would gain their own plans on nuclear warfare. What one has to keep in mind is the fact that at the end of the war, Russia suffered severe lost. 20-24 million people lost their lives, 25 million people were homeless and many homes and factories were destroyed. After 1945, Russia did not gain any more economic support from the U.S. and Stalin did not anticipate it (Grenville 337). Russian’s diplomatic ties with the West was tied into Stalin’s need to expand his empire. He demanded a western front in west Europe, and in France to relieve military pressure on Europe (Kennan 357). Even though, Churchill delayed this front, FDR assured the public that the front would be in the West. Much of this was appeasement to pacify Stalin so he would not abandon the war. The adoption of a somewhat sympathetic manner was adopted to the Soviet policy of post war growth. Reluctantly, America gave in to so much of Stalin’s demands out of war time emotion and fear of Nazi Aggression (Kennan 359-361). On a deeply personal level, Stalin did not want to lose in this war. Even though he did not want to be in it and up until Hitler invaded his country, he felt it couldn’t happen to him. As soon as he received word of the invasion, He didn’t believe it. After the neutrality pact of 1939, it may have been impossible in his mind. Stalin’s invasion of Finland may have put out mixed signals to Hitler that Russia was feeling very confident and that it needed to be checked. Molotov’s rejection of joining the Axis confirmed this. In a short time, Stalin was calling fellow Soviets to his side for the Great War and in a speech to his countryman on November 7, 1941, canonized past Russian heroes and told Russians to stand up to Hitler. During all this socialist propaganda did not erode but much of Stalin’s attention was diverted to the war and bringing his country together. Church doors were open again for Stalin, who studied for the priesthood, that his own party message would not be enough to bring people together (Tumarkin 63-64). This turned out to be a very emotional and draining point for the Soviet citizens for they gave so much for their home. Many women and children went beyond the front lines to defend their homes and built blockades for their defense. The Siege of Leningrad is an example of such horror. Thousands of people starved and or froze to death. People ate cats and dogs and sometimes each other in rare cases. Food was severely rationed and one needed a card to gain it. This Siege lasted for about 600 days. During this time period, Stalin toughened the Red Army to fight back. His philosophy: â€Å"Not A Step Back† pushed soldiers to their limits for to run away not only made you a coward but brought you death for desertion. This war took quite a toll on Soviet citizens and it is a war that they will never forget (Tumarkin 71-73). Reparations had to be made for this mass destruction. Despite, Russian offensives in to the west and the destruction of Berlin, Naturally Soviets would want a piece of Germany even for their own sake of vengeance. It almost seemed acceptable to make big requests after all that happened to them. This was a good chance to gain sympathy so you could get some just rewards. In discussions of post war reparations, Soviet-Western relations balanced out the need to end the war after the Nazi’s were crushed and to build a Europe free from oppression. To this extent is not quite clear how much the U.S. knew of Stalin’s brutality and the suffering of the Soviets and of the peopled conquered by the Soviets. With Roosevelt’s mention of democratic elements in Eastern Europe, Stalin would only let so much freedom continue. In as much as Russia was wronged in the war, Stalin would use the war to get what he wanted and that was control over as much land as possible so that his e mpire would grow. The Cold War in a sense would have been impossible to avoid by 1943-1945. It’s roots based on totalitarianism and the separation of ideas and beliefs caused it become a reality. The U.S. in it’s isolation joined the war after the Pearl Harbor attacks but beforehand only giving monetary aid to the British and Soviets. Roosevelt moved slowly in joining the war and it was in his reluctance that U.S. built such a great war time economy and that America emerged as the Victor. In viewing the two leaders of Soviet Russia and The U.S., Roosevelt was more idealistic and his mind was different from the destructive nature of Stalin’s philosophies. Roosevelt’s Four Freedoms, Freedom of Want, From of Religion, Freedom of Speech and Freedom Of Fear more or less became large part of the American Psyche. The phrase â€Å" The only thing we have to fear is fear itself† is used over and over again in speeches and is well loved. Roosevelt was loved by his people and he had sympathy for the people who were disconnected and poor .The difference between him and Stalin was that Roosevelt seemed sincere and that Stalin earned his respect through fear. Up until his death, Stalin’s Cult of Personality gave people such mixed reaction and fear. Years later his image was seen as only ruthless. It would this one factor that made many fear Communism and it’s growth. This growth grew out of the tyranny and confusion of Germany and Japan as they invaded the Europe and the Pacific. Possibly the only reason why Russia was never feared during the war was because that country suffered as it did at the hands of Hitler. At that time it was doubtful that outsiders knew how vicious Stalin was. Dealing with Russia’s internal problems was the least of the issues that had to be dealt with at Potsdam and Yalta. In Yalta, Roosevelt was accused of signing Eastern and Central Europe into Russia’s hands. Both he and Churchill did not meet the requests of Poland’s exile government for international control. No other countries were invited to Yalta to represent themselves nor they notified of what was said. Poland, Lithuania, Estonia, and Latvia were declared open for democratic reform but yet these countries remained heavily influenced by Communist powers. Other political parties were murdered or persecuted. Soviets agreed to help the U.S. and in return for Sakhalin and Kurline Islands. Many European nations felt betrayed because they felt that the free and democratic countries did not do what they promised to do. Signed treaties did nothing for these states as they became puppets of the Soviet regime. Going back to 1943, in the Tehran conference, Stalin, Roosevelt and Churchill met for the first time and it was agreed to launch Overlord in June of 1944. Stalin was looking for this support. Russia was asked to participate in the war against Japan. The allies would support the partisans in Yugoslavia. The Three Powers would keep in touch with each other to discuss post war and war issues. Nothing is said about Stalin’s reputation during these meetings and it appears that only thing that appears credible is the fact that Russia is a superpower thanks to strength of the Red Army. At Potsdam, where Germany was divided into four zones and Japan given the ultimatem to surrender that new elected President Truman and Churchill suspect Stalin has ulterior motives. The Atomic bomb is introduced and agreed upon to end the war and Stalin who already has spies discovering this, gives Truman the pat on the back to use it. It is ironic how these men shared so many ideas at these conferences and worked together to end the war became the same ones who started so much fear and distrust. Despite their ideological differences and their aims, they ended two camps of terrorism and in the end, Soviet Russia was just as vicious and tyrannical as the Japanese and the Nazi’s. The U.S. would hunt down and suspect anyone who didn’t support the American way as a trader or a Communist. It is easy to look at the events and ideas that shaped the Cold War and rely on any fact that represents the truth. There are too many issues to think about and dissect. As stated earlier, the differences in the way the U.S. and Russia approached terrorism and what their aims were after the war explain a lot about how the Cold War ensued. Diplomacy is so complex and important for a state. It is important that a foreign diplomat not be outguessed by the other party. As it was for Stalin and his ambitions, the war opened a door for him. His earlier diplomatic ties with Germany gave him the eastern sector of Poland and when Hitler turned the tables on him, it gave him an excuse to move west and take over parts of Europe. Both Russia and America would meet to gain control over Europe but Stalin would figure out the weaknesses of the U.S. and of Britain and use to his advantage. The framework of foreign diplomacy is such that diplomats try to appease each other for a common cause. It is e vident here that the Soviet Union was needed and that the U.S. would support it for those means. The Iron Curtain was created in 1946. In a speech made by Winston Churchill in Missouri, with Truman by his side, Churchill announced that the Iron Curtain divided the continent and that only strong Anglo-American allies can tear it down. God has willed the Americans the Atomic Bomb. This statement divided the U.S. and the Soviets indefinitely. George Kennan, expert in Russian affairs stated that the Soviets ready to attack and destroy the U.S. was largely a creation of the Western imagination. The Soviet Union became an enemy of the American people and it would be the Truman Doctrine that would aid Greece and Turkey and those who are fighting against dictatorships that subjugate them. This is indicative of the Mythical realities of war where there is a Us versus Them mentality and that the enemy lies and that WE tell the truth. They act on a will of power and we on self defense since we are moral and righteous. The enemies will must be broken and WE must use force. The same theory u sed on the Nazi’s and Japanese now focused on the Russians bent to teach them a lesson. Research Papers on Russia's Entry Into the Cold WarAppeasement Policy Towards the Outbreak of World War 2Assess the importance of Nationalism 1815-1850 EuropeQuebec and CanadaThe Effects of Illegal ImmigrationBringing Democracy to AfricaTwilight of the UAW19 Century Society: A Deeply Divided EraComparison: Letter from Birmingham and CritoPETSTEL analysis of IndiaCapital Punishment

The eNotes Blog Man Booker Prize ShortlistAnnounced

Man Booker Prize ShortlistAnnounced One of the most coveted accolades in the literary world is to be shortlisted for the Man Booker Prize.   As 1996 winner Graham Swift commented, Prizes dont make writers and writers dont write to win prizes, but in the near-glut of literary awards now on offer, the Booker remains special. Its the one which, if were completely honest, we most covet. The $50,000 is quite nice as well. Not only do authors look forward to the prize, but so too do booksellers. Following the announcements of the lists and the eventual winner, sales historically increase exponentially. The prize is awarded yearly to the best novel written in the English language.   The longlist, comprised of   thirteen novels, was announced on July 27. That longlist was pared down to a six novels on September 7. The eventual winner will be revealed on October 12. This years contenders are: Peter Carey Parrot and Olivier in America (Faber and Faber) Emma Donoghue Room (Picador Pan Macmillan) Damon Galgut In a Strange Room (Atlantic Books Grove Atlantic) Howard Jacobson The Finkler Question (Bloomsbury) Andrea Levy The Long Song (Headline Review Headline Publishing Group) Tom McCarthy C (Jonathan Cape Random House) Man Booker also offers Reading Group Guides for all of the books in contention, including the works on the longlist.

Cross culture awareness Essay Example | Topics and Well Written Essays - 4500 words

Cross culture awareness - Essay Example Organization culture is key element in the organizational excellence and it existence. Organizational culture is depending on the constructed environment of the organization, office layout, public documents like character and orientation of employees and manners of dress code, visible and audible patterns. This is group culture which is developed or invented by learning, internal integration and external adaptation. Cultural analysis is a key facto for identification and tackles the cultural differences between the parties who participate in a merger (Botha, 2001). Analysis of cultural difference and common factors in both organization and proper interaction between two parties on these difference are plays significant role in the success of a merger. Recruit Right, the company from USA and Managerial Recruiters from Japan decided to merge there business activities due to the market pressure and starts its new operation in Germany targeting the wide opportunity in European Market and also the opportunity to tackle the potential candidates, training program and tax incentives are the major enhancement for the companies to relocate and start its business in Germany. Both companies Recruit right and Managerial recruiters are belonging to two different countries which have totally different cultural. Merging these two companies are causing difficulties or issue not only because two cultural differences, but also the new endeavor they are looking to stars in Germany which is again totally different from the culture belonging to these two companies. It will be a challenge for the company to merge the two different corporate cultures and adopt totally new corporate culture. Corporate culture is the combination of the inherited values, tradition and symbols, which include general image, external and internal, prized rewards, bonus, company housing etc. Every company has its own individual characteristics and entity,

Senator Lamar Alexander Essay Example | Topics and Well Written Essays - 1500 words

Senator Lamar Alexander - Essay Example Lamar Alexander later served as Education Secretary under President George Bush. He ran unsuccessfully for the Presidency in 1996 and 1999, losing out to the GOP candidate Robert Dole in 1996 and George W Bush in 1999. Senator Lamar Alexander has generally voted with the majority of his Republican colleagues. But one of the issues that the Senator has been deeply concerned with is education. He has consistently provided support in the Senate for scientific research funding. During his tenure as Governor of Tennessee, he helped the State to become one of the first to reward its teachers and pay them more for better performance, while also ending tenure for bad teachers. He also supported a bill put forward in the Senate to provide an additional 10.2 billion dollars for federal education and Health and Human Services projects but has rejected other bills to provide more resources to local educational agencies and to community centers. He has proposed that parents be encouraged to create Education Savings Accounts in order to support the education of their children. On this issue therefore, he follows the line adopted by his own Party, where the effort is to make the available funding more productive in terms of what it is able to achieve. Where abortion and the family is concerned, he follows the line advocated by his party and opposes abortion, but has diverged from his Party line in his support for research carried out using stem cells derived from embryos, as demonstrated by his support for the Bill no: H.R. 810. Another important bill where he voted differently from the Republican Party was the bill H.R. 976, in which the Senate passed an expansion of the State Children’s Health Insurance Program, which increased federal funding and provided health insurance for million uninsured American children.

PROPOSAL FOR A DOUBLE-LINE VENTURE Assignment Example | Topics and Well Written Essays - 3250 words

PROPOSAL FOR A DOUBLE-LINE VENTURE - Assignment Example However, the business venture must assess and scrutinize the progress of the initiative to determine potential strengths and weaknesses. Meanwhile, inefficiencies and market failures will arguably contribute to emergence of numerous opportunities vital for growth and expansion of the double-line venture. Despite the numerous risks and potential challenges, the business venture will continue to capture the imagination of nonprofits and funders alike. The essay primarily focuses on a proposal for double-line venture. Entrepreneurial ventures pursue opportunities regardless of the resources they have and control. However, discovering the opportunities that lie outside of the current market structures remains a significant challenge to virtually all entrepreneurial ventures worldwide. A number of such opportunities in new and existing markets focus primarily on the needs of underprivileged or underserved customer segments. In most cases, inefficiencies and market failures contribute to the emergence of numerous opportunities. Entrepreneurs can successfully mobilize resources to help in resolving market failures in particular sectors of the economy and provide a viable solution to specific social problems. The primary objective of the double-line venture should be to create a new socially valuable product or service that will ultimately address the aforementioned challenges. In addition, the business venture, through its double-line program (second bottom line), is committed to measuring performanc e in relation to potential positive impacts on local communities. It also uses the power of business to bring about environmental and social change through various social enterprises and initiatives. This paper main purpose is to analyze the entrepreneurship in the global perspective; and specifically to highlight the concept of double line business concept. The idea of measuring conventional financial accounting concurrent with the social return will be

Euthyphro - Piety Essay Example for Free

Euthyphro Piety Essay The discussion between Socrates and Euthyphro is one of the most famous Socratic discussions because of the meaning set behind the actions. This discussion is focused on what is the piety or the holiness asked by Socrates to Euthyphro. Socrates appoints Euthyphro to help him understand what piety is as he admits he does not know, in order to help with his case against him. They argue about Euthyphro’s answer that piety is what the Gods love and impiety is the opposite. Socrates then questions which is dear because they love or they love because it is dear. Socrates challenges to comprehend an understanding of this indefinable concept and uses logic to understand what holiness is as provided by Euthyphro who is acting religious. This paper will show how the concept of holiness emerges from Euthyphro’s three definitions of piety. In addition this paper will suggest why Socrates goal for this discussion. Euthyphro’s three definitions of piety are well used with great examples, but Socrates always tries to shoot them down by trying to have a rejection. The first definition Euthyphro says is â€Å"Piety is doing as I am doing; that is to say, prosecuting any one who is guilty of murder, sacrilege, or of any similar crime-whether he be your father or mother, or whoever he may be-that makes no difference; and not to prosecute them is impiety† (Plato, 380 B. C. E. ). But at once Socrates says Bear in mind that I did not bid you tell one or two of the many pious actions but that form itself that makes all pious actions pious, for you agreed that all impious actions are impious and all pious actions pious through one form (Plato, 380 B.C. E. ). As you can see Socrates is determined to not have piety for anything that is happening at the time. Drawing a line between these particular contradictions is difficult because of cultural differences, values, moral, and religious beliefs within society. Euthyphro’s most important attempt to define piety comes with the suggestion that the pious is what all the gods love. Euthyphro states that The godly and the pious is a part of the just that is the care of the gods, while that concerned with the care of men is the remaining part of justice (Plato, 380 B. C. E. ). Socrates then asks, The pious is loved by the gods because it is pious, or is something pious because it is loved by the gods (Plato, 380 B. C. E. ). But since the gods are in a state of discord, and are at odds with each other and therefore have different views on what things are pious and what things are impious. He therefore proves that if an action or a man dear to the gods is pious, but an action or a man hated by the gods is impious then the same things then are loved by the gods and hated by the gods, and would both be god-loved and god-hated, which would make the same things both pious and impious at the same time. Socrates was a man who wanted his son to know that there is always moral reasoning to everything and that the right way is the correct way. By arguing with Euthyphro he tried to make him understand that no matter who you are or where you come from, you should always do everything because it is morally correct to do it. By Socrates going against every definition of piety he had, I think he made Euthyphro think deeper in himself about the actions played out from him. Socrates had an intense belief in the importance of virtue, he believed that if man was able to gain the wisdom that attended virtue then he would no longer do wrong simply because humans do not choose to do the wrong actions. Socrates felt that the first step in becoming virtuous was to acknowledge ones own ignorance and rid him of it. He encouraged men to be more apprehensive with their self-development and less obsessive in obtaining material wealth.. However, Socrates expresses that virtue is not a goal that can be taught, but that it must be learned in each individuals own experience. To me he meant that not only by experiencing the good and the bad will a human understand how to make things right. Piety to me is knowing how to make the moral situation correctly. I think that by someone wanting to do the right thing it can make other do them as well. Being piety knows that one must always abide by the rules given to them no matter who you are and where you might be. This does not pertain to every one is the world we live in because loopholes are always around and someone always knows how to use them when they need to. Religion has, is, and always will be a point of conflict for people for one that not everyone prays in the same way and believes in the same kind of religious beliefs. We are always free to believe or disbelieve in what we want to, and this leads to an inability for us to universally agree on a single kind of doctrine. But religion is exactly that, a doctrine and everyone follows one, whether they know it or not, people follow it and some live by it. A doctrine is something that defines a person’s life by dictating the choices that person’s chooses and tends to live on. God’s will can be someone’s doctrine the same way a person’s own set of morals can. Following this logic, a religious person is simply someone who follows a predetermined set of ideals, God’s. With this in mind, it can be concluded that while an atheist chooses to follow his own set of morals, the religious man simply chooses to follow an already existing set. I think a good example of following the rules are like traffic violations. The violations set on the road are to keep everyone from getting hurt and letting others get away with anything they can. This is an example of treating everyone equally and not letting no one get away with something just because of the their race, religion, money or even fame. The problem that we face in the world we live in is that people who do have money, fame or some kind of high importance are let of a lot easier than others how are struggling in life. Money and fame plays a major role in the world that we live in and it is sad that everyone has to stand by and see it with no options of saying what they might want to say to be heard. Reference Page Ackah, K. (2006). Platos euthyphro and socratic piety. Scholia: Studies in Classical Antiquity, 15, 17-34. Retrieved from http://search. proquest. com/docview/211628972? accountid=32521 EUTHYPHRO. (1982). World Philosophy, 115. Mosser, K. (2010), A Concise Introduction to Philosophy. San Diego, CA: Bridgepoint Education, Inc.

Purpose And Definition Of OEE Engineering Essay

Purpose And Definition Of OEE Engineering Essay 2.1 Introduction These days, in this demanding world, the total elimination of waste is for the survival of the organization. The waste caused due to the failure or shutdown of facilities that has been built with enormous investment, and also waste such as defective products ought to be completely eliminated. In a manufacturing sector, companys facilities have to be functioning efficiently in order to gain desirable productivity, inventory cost, delivery as well as quality. In this context, the motive of OEE analysis and measurement is to reduce the equipment losses to zero and has been recognized as a necessity for many organizations. According to Bamber et al. (1999) [5], the role of teamwork, small group activities and the participation of all employees is crucial to accomplish equipment improvement aims. Hence, OEE is use as metrics to determine the Total Productive Maintenance (TPM) activities. On the other hand, it can also be said that OEE shows a consistency approach to measure the effectiven ess of TPM as well as other programs by providing an overall structure for measuring production efficiency. As explained by (Dal et al., 2000) [6], the role of OEE goes far beyong not only monitoring and controlling, but also takes into consideration of process improvement initiatives/programs, provides a systematic method for establishing production targets, prevents the sub-optimization of individual machines or product lines, as well as incorporates practical management tools and techniques. This ensures the attainment of a balanced view of process availability, quality and performance. Another statement made by Lesshammar and Patrik (1999) [7], in their case studies, have presented how OEE is being used in industry and as well have reported that this metric forms a useful part of an overall system of measurement. In other words, it provides a useful method to measure the effectiveness of manufacturing operations from a single piece of equipment to the whole manufacturing plant of several manufacturing plants in a group. In doing so, OEE not only provides a complete scenario of where productive manufacturing time and money is being lost, but at the same time uncovers the true , hidden capability of the industry. Thus, it becomes the key manufacturing decision support tool for constant improvement programmes [8]. Apart from that, OEE is an established method of measuring followed by optimizing the efficiency of a machines performance or that of a whole industry plant. The effectiveness of a plants production highly depends on the effectiveness with which it makes use of equipment, materials, man and methods as explained by Suzuki (1999) [9]. Besides, OEE can have a significant impact on the productivity of a manufacturing unit. Therefore, through OEE manufacturers may systematically direct their business towards attainment of continuous improvement operating margins, optimized competitive position and maximized utilization of capital. Some of the more prominent firms have benefited from OEE as a measurement gauge for implementing improvement activities that increases company profits and costs. . 2.2 History of OEE OEE is an essential metric and basic methodology for manufacturers practicing a Lean manufacturing strategy that is zero waste in their value streams. This metric element follows the well-founded principle: If you cant measure it, you cant manage it [10]. Some advocates are fond of the view If youre not taking score, youre only practicing [10]. In 1972, the Japanese Plant Maintenance Institute (JPMI) developed a theory called Total Productive Maintenance [11]. The preliminary aim of TPM was to eradicate the six big losses and subsequently the eight wastes. It was first implemented and developed in Toyotas automotive plants, soon after evolving into world renowned Toyota Production System. An organizational culture was formed by Toyota that focused on the systematic identification and elimination of all waste from their production process where the technical / human contributions to production are maximized. Reengineering and organizational change is used to maximize yield, minimize cost and time-compress the supply chain by fully excluding non-value added activities and not right first time events. The OEE gauge came forward from the Japanese production focused, equipment management framework of TPM [10]. OEE is the key measure of the tangible benefits accessible from TPM by Seiichi Nakajima, the founder of Total Productive Maintenance who initially used OEE to depict a fundamental measure for tracking production performance. He (Seiichi Nakajima) challenged the complacent view of effectiveness by focusing not merely on keeping equipment running smoothly, but on creating a sense of joint responsibility between maintenance workers and operators to optimize the Overall Equipment Performance. OEE symbolized in the first of the original pillars of TPM. Guided all TPM activities and measured the results of these loss focused activities. Therefore, the use of OEE had evolved into the current focused improvement pillar, one of eight TPM pillars. During the mid 1990s, coordinated by SEMATECH the semiconductor wafer fabrication industry has adopted to improve the productivity of the fabrication [11]. Since then, manufacturers in other industries throughout the world have embraced OEE ways to improve their asset utilization. 2.3 The purpose of OEE The OEE metric can be applied at a number of different levels within a manufacturing environment. First, OEE can be used as a benchmark for measuring the initial performance of a manufacturing industry as a whole. Thereby, the initial OEE measure can be compared with future OEE values, hence quantifying the level of enhancement made. Subsequently, an OEE value calculated for one manufacturing line can as well be used to compare line performance across the industry, thus highlighting any poor line performance. If the machines processes work individually, an OEE measure can discover which machine performance is worst, and therefore indicate where to focus TPM resources ( Nakajima 1988) [5]. Dal et al. (2000) [6] declared that by utilizing largely existing performance data, such as preventive maintenance, absenteeism, accidents, material utilization, conformance to schedule, labor recovery, set-up and changeover data, etc., the OEE measure may possibly provide topical information for daily decision making. Due to this, the OEE measurement method within a industry becomes the elementary measure of TPM activities, as well as a basis of improvements for the TPM process. 2.4 Definition of OEE In the era of globalization today, manufacturers are forced to look for creative ways to maximize additional investment due to the continuous pressure of global competition which results in lower margin. In this state, OEE has becoming a hot topic. In its most basic form, OEE offers a straightforward ways to keep track of manufacturing performance as well as to measure the total equipment performance- the degree to which the asset is doing what it is supposed to do. However, the true power of OEE as a dedicated application lies in the ability to use it as a change-enabler, or tool for continuous improvement and lean manufacturing programs [8]. There are various methodologies to gauge manufacturing efficiency. Generally most companies will have a number of measures already in place. Nevertheless, many now disagree that none of these approaches are as comprehensive or far reaching as the OEE achievement, since OEE provides a way to measure the effectiveness of manufacturing operations from single piece of equipment to the manufacturing plant in entirety, or several manufacturing plants in a group. as a result, OEE can be well thought-out as a central KPI (key performance indicator). It drives an organization to examine all aspects of asset performance in order to ensure gaining the maximum benefits from a piece of equipment that is already bought and paid for [12]. Thus, it is obvious that OEE acts as an approach for monitoring and managing the lifecycle of manufacturing assets. On the other hand, OEE can be expressed as a commonly accepted set of metrics that bring clear focus to the key success drivers for manufacturing enterprises [13]. In other words, it measures both efficiency (doing things right) and effectiveness (doing the right things) with the equipments. These measurement comprises of three fundamental elements where each one is expressed as a percentage and accounting for a different kind of waste in the manufacturing process. Thus, it is understood that OEE is a function of the three factors. The three factors mentioned below are briefed as: Availability or uptime (downtime: planned and unplanned, tool change, tool service, job change etc.) A measure of the time the plant was in fact available for production compared to the manufacturing requirements. Any losses in this area would attribute to major breakdowns or extended set up time [14]. Performance efficiency (actual vs. design capacity) The rate that concrete units are produced compared to the designed output. Losses in this area would attribute to slow speed running, minor stoppages or adjustments [14]. Rate of quality output (Defects and rework) A measure of good quality, saleable product, minus any waste. Losses in this element would attribute to damage rejects or products needing rework [14]. Measuring OEE can be done simply by capturing the five basic pieces of information as stated below: Planned Production Time the planned amount of time in which production is planned for a specific line. Down Time specify as the amount of time the process is not running during the planned production time (interrupts to production). Ideal Cycle Time represent as the theoretical minimum of time needed to produce a single piece of product. Total Pieces denote as the total number of pieces produced during the planned production time. Good Pieces signify as the total number of pieces produced that meet quality standards. Figure 2.1 The Overall Equipment Effectiveness flow chart 2.5 Objectives of OEE Overall Equipment Effectiveness records and data informations are used to categorize a single asset (machine or equipment) and/or single stream process related losses in order to improve total asset reliability and performance. Besides, the information is useful and essential as it helps to identify and categorize major losses or reasons for poor performance. OEE offers the basis for setting enhancement priorities as well as for the root of measurement and analysis. In addition, the percentage determined is used to track and trend for improvement, or decline, in equipment effectiveness over a period of time. Hidden or untapped capacity in a manufacturing process can be pointed out through these percentages and lead to balance flow. On top of that, OEE can be used to develop and enhance collaboration between asset operations, maintenance, purchasing, and equipment engineering to jointly identify and reduce (or eliminate) the 2 major causes of poop performance since maintenance alone cannot improve OEE. 2.6 The use of OEE The root why companies uses OEE is to avoid making inappropriate purchases, and help them focus on improving the performance of machinery and also plant equipment they already own. Companies should also start with the area that will provide the greatest return on asset because OEE is able to find the greatest areas of improvement. These OEE formula with the major factors involves will show how improvements in quality, changeovers, machine reliability improvements, working through breaks and more. In business world today, when many manufacturers strive towards world class productivity in their facility, this simple method will perform an excellent benchmarking tool [15]. Besides, the simple derived OEE percentage makes a great motivational system as it is easy to understand and this single number is displayed where all facility personnel can view it. By giving employees such as operators and workers an easy way to see how they are doing in overall equipment utilization, production speed, and quality, in return they will strive for a higher number instead. 2.7 Defining Six Big Losses One of the major goals of TPM and OEE programs is to reduce and/or eliminate what are named as the Six Big Losses, the most common causes of efficiency loss in manufacturing sectors. This was put forwarded by Nakajima in 1989 [16]. There are basically 3 categories of OEE loss which include: Down Time Loss, Speed Loss and Quality Loss. Each of these types has been divided into two sub-losses. They are known or called the Six Big Losses. Basically, OEE is generally measured in terms of these six losses as showed below. They are categorized as stated below: Breakdown Losses Setup and Adjustments Losses Small Stops Losses (Idling and Minor Stop Losses) Reduced Speed Losses Startup Rejects (reduced yield losses) Production Rejects (quality defects and re-work) Categorizing these data makes addressing the Six Big Losses much easier, and a key goal should be fast and efficient data collection, with data put to used throughout the day in the real time. 2.2 Addressing the Six Big Losses Measurement is essential to establish appropriate metrics. It is important necessity of continuous improvement processes. As stated by Nakajima (1988), an efficient way of analyzing the efficiency of a single machine or an integrated manufacturing process is through OEE measurement [17]. It is a function of availability, performance rate, and quality rate. In fact, the three dimensions are measures in terms of equipment losses. Following this, Nakajima (1988) defined these losses into six major categories as follows [17]: 2.7.1.1 Availability Losses Based on the mechanism principle, a machine most likely is available 24/7/365. However, this comes from an ideal perspective, from which one can measure true machine availability. There are few genuine factors that affect on availability, some of which are planned, and some unplanned. For planned downtime, it takes into account of holidays, scheduled maintenance and vacation. While for unplanned downtime, it includes equipment failures and setup and adjustments. It is possible to factor in the planned downtime; however it is the losses due to unplanned downtime that can negatively affects machine availability. Breakdowns Breakdown Losses are classified as by far the biggest of the Six Big Losses. These losses are significant due to the fact of its sudden, dramatic failure in which the equipment stops completely [18]. In the view of the fact that there is no production therefore this unexpected breakdown are undoubtedly elements of losses. The breakdown can cause all equipment functions to be terminated even though the source lies in a single specific function. Nevertheless, deterioration related to problem and losses are also regard as break down losses. It is important to improve OEE by eliminating unplanned downtime. But if the process is down, other OEE factors cannot be dealt with. Therefore, it is not merely important to know how much downtime your process is experiencing (and when) at the same time to be able to attribute the lost time to the specific reason or cause for the loss [19]. Setup and Adjustments Whenever the production of one product stops and the equipment is adjusted to meet the requirements of another product, this is where setup and adjustment take place. The loss of time due to this delay is known as setup and adjustments Basically, setup and adjustments period of time is normally measured as the time between the last good parts produced before setup to the first consistent good parts produced after setup. In order to constantly produce parts that meet the quality standards, it should generally include substantial adjustment and/or warm-up time. Various innovative ways have been used by companies to reduce setup time. These comprises assembling changeover carts with all tools and supplies necessary for the changeover in one place, pinned or marked settings so that coarse adjustments are no longer necessary, and use of prefabricated setup measures [20]. 2.7.1.2 Performance Losses Machine performance referred to as the net production time during which products are produced. The more the machine produces, the greater the OEE metric. However, speed losses and small stops will inhibit the overall performance of machine. If such losses is not recognized and addressed, the machine performance cannot be fully optimized. Reduced Speed Reduced Speed can be classified as one of the most difficult of the Six Big Losses to monitor and record. This is due to the reason that there is a significant difference between the theoretical maximum speed and what people think the maximum speed is. In most cases, in order to prevent other losses such as quality rejects and breakdowns, the production speed needs to be optimized. Losses due to reduce speed are therefore, often ignored or underestimated [21]. It happens when the equipment runs slower than its optimal or maximum speed. Apart from that, reduced speed is the difference between designed speed and the actual operating speed [21]. There are various reasons where equipment may be running at less than its designed speed, for instance non-standard or difficult raw materials, history or past problems, mechanical problems, or fear of overloading the equipment. This loss of speed is actually converted into time during the OEE calculation. Small Stops We can also assume small stops as one of the most difficult of the Six Big Losses to monitor and record. Whenever a machine shows short interruptions and does not have a constant speed, this will not result in a smooth flow of production. Minor stoppages and the subsequent loss of speed can be the cause from products blocking sensors or products getting stuck in the conveyor belts. The machines effectiveness will be diminished drastically if these hitches occur frequently [21]. The occurrence of these losses happens whenever equipment stops for a short time as the result of a temporary problem. As an example, a work-piece is jammed in a chuck or when a sensor activates and shut down the machines, this will definitely result in a minor stoppage. As soon as someone removes the jammed work-piece or resets the sensor instantly, it operates normally again. These losses also include idling losses that occur when equipment continues to run without producing. Thus, since idling and minor stoppages interrupt jobs, therefore they can also be categorized as breakdowns. Despite that, the two are fundamentally different in that a minor stoppage and the duration are usually less than 10 minutes. 2.7.1.3 Quality Losses A scrap is when the final product is not saleable, and the entire process has been wasted on product that will never make it to the customer. Thus, it is very essential to take into account the quality of the product while evaluating OEE. Availability and speed often has been the main focus, and quality is left behind. The key to keep in mind is that without a good product, the rest of the operation is a white elephant. Generally, quality losses are generated during startup while the machine is ramping up, during adjustment, or during normal production, as rejected/unwanted product due to process instabilities. Startup Rejects Products that do not meet the quality standards are called scraps, even if they can be sold as sub-spec. A specific type of quality loss is the startup losses where these losses occur due to when: Starting up of the machine: the production is not stable as soon as the machine starts and the first products do not meet the quality standards. The process of the machine at the end of a production run is no longer stable and the products no longer to be able to meet the specifications require. Quantities of products are no longer counted as part of the production order and consequently are considered as loss. These are usually hidden losses, which are often considered to be unavoidable. The scale of these losses can be surprisingly large [21]. Certain adjustments and warm-up time is required for several equipments to obtain optimum output. Losses that happen in the early stages of production during machine setup to stabilization of product quality are called the startup losses. The losses differ with degree of stability of processing condition, operators technical skill, maintenance level on equipment, and many more. Production rejects A product that does not meet the quality specifications/standards for the first time, but can be reprocessed into good products is known as rework products. Reworking products is not a disadvantage as the product can be sold to fit other demand needs. However, the product was not right first time and is therefore a quality loss just like scrap [21]. Production rejects are classified as quality losses that are not caused by startup. These losses arise only when products produced are not conforming to the specifications. Parts that require rework of any kind should be considered reject and this happens during steady state production. Example of the Downtime loss, Speed loss, and Quality loss is depicted in the following page. The Six Big Losses with three categories are shown in figure below. The following table shows how this Six Big Losses are categorized with examples given. Figure 2.3: Classification of Six Big Losses. The table below lists the Six Big Losses, and show how they are relate to the OEE Loss categories. A typical major loss, the categories of OEE as well as examples of events is shown as follow: OEE Loss Category   Six Big Loss Category   Event Examples   Down Time Loss   Breakdowns   à ¢Ã¢â€š ¬Ã‚ ¢ Tooling Failures à ¢Ã¢â€š ¬Ã‚ ¢ Unplanned Maintenance à ¢Ã¢â€š ¬Ã‚ ¢ General Breakdowns à ¢Ã¢â€š ¬Ã‚ ¢ Equipment Failure   Setup and Adjustments à ¢Ã¢â€š ¬Ã‚ ¢Ã‚  Setup/Changeover à ¢Ã¢â€š ¬Ã‚ ¢ Material Shortages à ¢Ã¢â€š ¬Ã‚ ¢ Operator Shortages à ¢Ã¢â€š ¬Ã‚ ¢ Major Adjustments à ¢Ã¢â€š ¬Ã‚ ¢ Warm-Up Time Speed Loss   Idling and Minor stops   à ¢Ã¢â€š ¬Ã‚ ¢ Obstructed Product Flow à ¢Ã¢â€š ¬Ã‚ ¢ Component Jams à ¢Ã¢â€š ¬Ã‚ ¢ Misfeeds à ¢Ã¢â€š ¬Ã‚ ¢ Sensor Blocked à ¢Ã¢â€š ¬Ã‚ ¢ Delivery Blocked à ¢Ã¢â€š ¬Ã‚ ¢ Cleaning/Checking   Reduced Speed à ¢Ã¢â€š ¬Ã‚ ¢ Rough Running à ¢Ã¢â€š ¬Ã‚ ¢ Under Nameplate Capacity à ¢Ã¢â€š ¬Ã‚ ¢ Under Design Capacity à ¢Ã¢â€š ¬Ã‚ ¢ Equipment Wear à ¢Ã¢â€š ¬Ã‚ ¢ Operator Inefficiency Quality Loss   Start-up Losses à ¢Ã¢â€š ¬Ã‚ ¢ Scrap à ¢Ã¢â€š ¬Ã‚ ¢ Rework à ¢Ã¢â€š ¬Ã‚ ¢ In-Process Damage à ¢Ã¢â€š ¬Ã‚ ¢ In-Process Expiration à ¢Ã¢â€š ¬Ã‚ ¢ Incorrect Assembly   Defect Losses à ¢Ã¢â€š ¬Ã‚ ¢ Scrap à ¢Ã¢â€š ¬Ã‚ ¢ Rework à ¢Ã¢â€š ¬Ã‚ ¢ In-Process Damage à ¢Ã¢â€š ¬Ã‚ ¢ In-Process Expiration à ¢Ã¢â€š ¬Ã‚ ¢ Incorrect Assembly Table 2.1 : The Six Big Losses in OEE 2.8 OEE factors As explained in previous subsequent chapter, the OEE calculation is based on the three OEE factors. This comprises of Availability, Quality and Performance. They are as well referring as Effectiveness Factors. Here is how each of these factors is calculated. Availability The Availability part of OEE represents the percentage of scheduled time that the equipment is available to function [18]. This Availability element is a measurement of the uptime that is designed to exclude the effects of performance, quality, and scheduled downtime events. Since Availability takes into account of Downtime loss, the formula is calculated as: 20 Availability = Operation time Planned Production time Where, Operation time = Planned production time Unscheduled Downtime Production time = Planned production time Scheduled Downtime Downtime losses zero indicates the availability is 100%, where the gross operating time equals the available time for production. i.e. Operation time equals Planned Production time. Therefore, it can be said that 100% Availability means the process has been running without any recorded stops. Performance Performance can be denoted as the ratio between Net Operating Time and Operating Time. Since Performance takes into account of speed loss, the formula is calculated as: 22 Performance = Net Operating Time Operating Time The Performance portion of OEE corresponds to the speed at which the machine runs as a percentage of its designed speed. This Performance element is a measurement of speed that is designed to exclude the effects of availability and quality [18]. Performance does not penalize for rejects, which imply even if the work is rejected or rework, it will still be included in the planned and actual hours accordingly. Since Performance takes into account Speed Loss, the formula is calculated as: Performance = Ideal Cycle Time Operating Time / Total Pieces 23 Where, Ideal Cycle Time = the minimum cycle time that the process can be expected to achieve in optimal circumstances. It is at times called, Theoretical Cycle Time, Nameplate Capacity or Design Cycle Time. Since Run Rate is the reciprocal of Cycle Time, Performance can also be calculated as: Performance = Total Pieces / Operating Time Ideal Run Rate 24 Performance is limited at 100%, to make sure that if an error is made in specifying the Ideal Cycle Time of Ideal Run Rate, the effect on OEE will be limited. Therefore, it can be said that 100% Performance means the process has been consistently running at its theoretical maximum speed. Quality Rate The Quality portion of the OEE signifies the good units produced as a percentage of the total units produced [18]. The Quality metric is a measurement of process yield that is designed to exclude the effects of availability and performance. Quality is the ratio of Fully Productive Time to Net Operating Time. Quality = Fully Productive Time / Net Operating Time 25 Quality = Good Pieces / Total Pieces Since Quality takes into account of Quality Loss, the formula is calculated as: 26 (Total no of units of processed products- No of units of no good products)/(total no of units of processed products). Thus, it can be said that 100% Quality means there is no rework or reject pieces. Therefore, since OEE takes into account all three OEE factors, the formula is calculated as: 27 OEE = Availability x Performance x Quality Therefore OEE is the product of its effectiveness factors; Availability, Performance and Quality. The study of each of these effectiveness factors will improve the Overall Equipment Effectiveness. Below diagrams shows the three major elements of OEE together with formula calculated . Figure 2.4à ¢Ã¢â€š ¬Ã‚ ¦.Shows the formula on how to calculate OEE Figure 2.5à ¢Ã¢â€š ¬Ã‚ ¦Shows the OEE Factors Loss OEE Factor Planned Shutdown Not included in OEE calculation Down Time Loss Availability is the ratio of Operating Time to Planned Production Time (Operating Time is Planned Production Time less Down Time Loss). Calculated as the ratio of Operating Time to Planed Production Time. 100% Availability means the process has been running without any recorded stops. Speed Loss Performance is the ratio of Net Operating Time to Operating Time (Net Operating Time is Operating Time less Speed Loss). Calculated as the ratio of Ideal Cycle Time to Actual Cycle Time, or alternately the ratio of Actual Run Rate to Ideal Run Rate. 100% Performance means the process has been consistently running at its theoretical maximum speed. Table 2.1 indicates the 3 main factors of OEE Quality Loss Quality is the ratio of Fully Productive Time to Net Operating Time (Fully Productive Time is Net Operating Time less Quality Loss). Calculated as the ratio of Good Pieces to Total Pieces. 100% Quality means there have been no reject or rework pieces. 2.9 OEE Components of Plant Operating Time 2.9.1 Components of Plant Operating Time In order to establish an accurate measurement, OEE analysis begins with Plant Operating Time. Basically, this Plant Operating Time implies as the amount of time the facility is open and available for equipment process. It can also be refer as the maximum amount of time and is a constant. One day consists of 24 hours of 60 minutes. While, for one week, it consists of 7 days of 24 hours. Whereas, in one year consists of 52 weeks. At times, Plant Operating Time is also referred to as Theoretical Production Time. It consists of different losses like speed and quality loss as well as fully productive time 2.9.1 Plant Production Time Once a category of called Planned Shut Down is subtracted from Plant Operating Time, the remaining available time is called Planned Production Time. The Planned Shut Down shall include any events that should be excluded from efficiency analysis since there was no intension of running production [22]. For example, tea breaks, lunch breaks, scheduled maintenance or periods where there is nothing to produce. Nevertheless, Planned Production Time is also known as Available Production Time. OEE initiates with Planned Production Time and analyze efficiency as well as productivity losses that occur, with the aim of eliminating or reducing these losses. OEE starts with Plant Operating Time and end up with Fully Productive Time, screening the source of productive loss that occur in between. 2.9.1.1 Operating Time From Planned Production Time, the downtime loss is subtracted to gain Operating Time. The downtime losses inclusive of any events that stop planned production for an appreciable length of time (normally several minute-long enough to log as a traceable event) [22]. Examples of these include material shortages, equipment failures, and changeover time. Since it is also includes as type of downtime, the changeover time is included in OEE analysis. Even though it may not be possible to reduce 9 changeover times, however, it can be reduced in most cases. The remaining available time is called Operating Time and also known as Gross Operating Time [22]. 2.9.1.2 Net Operating Time From the Operating Time, the speed loss is deducted to obtain Net Operating Time. The speed losses take account of any factors that cause the process to operate less than the maximum possible speed while running. Examples of these include machine wear, substandard materials, miss-feeds, and operator inefficiency. 2.9.1.3 Fully Productive Time As for Net Operating Time, the Quality Loss is subtracted and the remaining available time is called the Fully Productive Time. These quality losses accounts for produced pieces that do not meet quality standards, together with pieces that require rework. The goal here is to maximize Fully Productive Time w